Compatible Wall Mount Screws for Samsung QN32Q50RAFXZA 32 inch 4k smart TV

Looking for compatible wall mount screws that would fit in the 4 holes on the back of your SAMSUNG QN32Q50RAFXZA Flat 32″ QLED 4K 32Q50 Series Smart TV??? If yes then this article was specifically written for you.

In the article about Samsung QN32Q50RAFXZA 32-inch QLED 4k Smart TV Review  i mentioned that two of the cons of the Samsung 32 inch 4K TV are….

  • The v shaped legs that come with Samsung QN32Q50RAFXZA 32 inch 4k smart TV are so far apart and isn’t adjustable in any way (no height/tilt adjustment), which leaves a lot of room for improvement. Unlike other models, Samsung took the pedestal setting out of the center of the Samsung QN32Q50RAFXZA so the legs have to go on the ends. This insinuates that Samsung QN32Q50RAFXZA will require a big table to set it on.

As a result of the awkward/Unique V shaped legs, many people may consider wall mounting their  Samsung QN32Q50RAFXZA 32-inch QLED 4k Smart TV.

To make matters worse for consumers, Samsung didn’t include 4 screws needed to attach the TV to a wall mount ; which many customer find irritating especially when it’s a $500 TV. As an expensive TV many customers expected that it should have come with wall mount crews.

As a result, if you want to mount this TV you will have to order the screws for it separately (M3 Mounting Screws IL are what you want). To help complicate things, the mounting holes are also much higher than they are on most TVs. And if you don’t use Samsung’s specific wall mount (apparently not available online) expect to make several trips to the hardware store as Samsung uses small diameter insert holes too deep for the usual 12mm screws and too shallow for the usual 35mm screws provided by non-Samsung mounting kits (eg, sold by Amazon).

The Compatible Wall Mount Screw for Samsung QN32Q50RAFXZA 32 inch 4k smart TV is M4 .70 pitch 19-22mm with a flat washer and your tv mount.

Buy on Amazon

Finally, for people wondering about VESA mounting, it’s a 100×100 vesa mount plate. I used M4 x 25mm cap head screws with washers and it’s fine. When screwing the screws in, take your time and don’t overtighten.

  •  Secondly, due to Lack any directions or manuals so installation can be challenging.

If you are in the market for a wall mount bracket for Samsung QN32Q50RAFXZA 32-inch QLED 4k Smart TV , I strongly recommend you buy the ECHOGEAR Full Motion TV Wall Mount Bracket.

 

We will be happy to hear your thoughts

Leave a reply

Official Website
Logo
Enable registration in settings - general